Product Overview
DPC PRIME 6+ SPRAY COATING - PLATELET INFUSED RESIN FORMULA
KEY FEATURES
DURABILITY: UP TO 6 MONTHS BARE PAINT - UP TO 10 MONTHS WHEN USED OVER DPC PRIME COATINGS
HARDNESS: 6H
PLATELET INFUSED RESIN: INCREASED DURABILITY OF HYDROPHOBIC PROPERTIES
WATER CONTACT ANGLE: 130 DEGREES
WATER SLIDE ANGLE: 12.1 DEGREES
HYBRID SOLVENT BASED FORMULA: INCREASED ENVIRONMENTAL DURABILITY
SLICKNESS: ULTRA SLICK
APPEARANCE: ULTRA HIGH GLOSS
SKILL LEVEL: ABSOLUTE BEGINNERS & PROS
CONSUMPTION: TWICE A YEAR OVER ANY OF THE DPC PRIME COATINGS FOR DAILY DRIVERS - PERFECT MATCH FOR DPC PRIME COATINGS WITH INORGANIC COMPOUNDS AND PLATELET RESINS
IMPORTANT NOTE: 1a) CAN BE USED OVER ANY OF THE DPC CERAMIC COATINGS - NON DPC COATINGS (PERFORMANCE MAY VARY) BUT UNLIKELY. 1b) DUE TO PRIME 6+ BEING A HYBRID SOLVENT BASED FORMULA - CAN BE USED FOR VEHICLES ALREADY TREATED WITH DPC QD, TR8, LOTUS, AND VANISH. THIS ISN'T POSSIBLE WITH DPC 12+ OR 18+ SPRAY COATINGS
WELCOME TO PRIME TIME!
Introducing our revolutionary ceramic spray coating DPC Prime 6+, formulated with platelet infused resins to provide unbeatable durability and advanced hydrophobic properties.
Prepare to be amazed by the incredible gloss and slickness achieved with this cutting-edge technology. Our ceramic spray coating offers a long-lasting protective layer, ensuring your vehicle remains shielded from many environmental contaminants in between maintenance washes.
Unleash the power of platelet infused resins, boosting the coating's durability to levels previously unheard of. This chemical fusion creates a bond that can withstand harsh conditions at a higher level vs water based ceramic spray coatings, keeping your vehicle protected for an extended period.
Experience the ultimate hydrophobic effect, as water beads and effortlessly rolls off your car's surface. With this ceramic spray coating, washing your vehicle becomes a breeze. You'll spend less time and effort maintaining its stunning appearance.
Make a smart investment in protecting your vehicle with our ceramic spray coating. Enjoy the benefits of increased durability, ultra hydrophobic properties, and an incredible glossy shine. It's time to elevate your vehicle's appearance to a level that leaves a lasting impression!
APPLICATION INSTRUCTIONS
1) Shake well before use
2) Surface should be clean & cool to the touch
3) Apply fine mist to one section
4) Spread evenly across surface with microfiber towel
5) Flip towel to dry surface and buff off the surface
6) Keep treated vehicle dry for 6 hours - full cure 6 days
STORAGE AND SHELF LIFE
1) STORE IN COOL AND DRY SPACE AWAY FROM DIRECT SUNLIGHT
2) SHELF LIFE UNOPENED OR OPENED - 2 YEARS
3) FLUSH OUT TRIGGER SPRAYER WITH WATER AND DRY AFTER USE FOR BEST PERFORMANCE
4) SPRAY COATING WILL NOT HARDEN IF STORED PROPERLY - 65-75 DEGREES AND LOW HUMIDITY
WARNING AND SAFETY
1) KEEP AWAY FROM CHILDREN
2) DO NOT INGEST
